How to quickly set up wired Internet on a computer or laptop. How to set up an automatic Internet connection via PPPoE in Windows How to set up a network connection on Windows 10

Nowadays, it is impossible to imagine the life of many people without a computer and the Internet. As technology advances, not only computers improve, but also operating systems. Recently, everyone was happy about the release of the seventh and eighth versions of the operating system, but before they knew it, a full-fledged Windows 10 had already entered the market. Each subsequent version of the operating system is more functional and fresher than the previous one, so users immediately want to install it on their PC. Ten." And then a problem appears: the connection to the Internet is lost. The question arises: how to set up Internet access? We will talk about this in this article.

Reasons for lack of Internet on Windows 10

Let’s note the reasons for the lack of Internet, because it may well be that the “ten” has nothing to do with it, and you should make sure of this. There are several main reasons for the lack of Internet in the top ten:

• Damage to the network line is the main reason for the lack of Internet. There may be a break or deformation of the cable, or a breakdown in the normal operation of this or that equipment. First you need to call the provider and make sure that everything is in order with the wires and equipment.
• If connection to the Internet is provided using a 3G modem or SIM card, then the lack of network may be due to poor network coverage of the mobile operator.
• If the Internet is provided via Wi-Fi, the reason for the lack of access may be the excessive distance of the Wi-Fi router from the PC.
• Deformation of the home network cable or connector - look at the home cable and connector and make sure they are in good condition.
• Router malfunction - to make sure that the router is not the cause, unplug it from the network for a few seconds.
• The network card in the Wi-Fi adapter is malfunctioning - you need to restart the PC and remove the adapter from the connector. After a minute, put it back in.

So, we went through various options and, through the process of elimination, realized that of the above reasons, none of them are “yours.” Then one thing remains: the Internet connection settings have been lost due to the reinstallation of the operating system. In this case, you just need to check and re-set the necessary settings.

Checking adapter properties

If the problem of lack of Internet access is software and can naturally be solved specifically from your PC, then it can be eliminated without effort. First of all, check the properties of the adapter, and this is not difficult to do.
Click on the Internet icon, then select “Network settings”. Here you will need the “Enternet” item, in it select the line “Configure adapter parameters”.
A window will open where you select the network you need, then right-click on the “Properties” button, then on the “Properties” section. Another window will open where you need to check whether the checkboxes are next to IP version 4 and IP version 6. If the “birds have flown”, check them again. The Internet may not work due to failure to receive an IP address.

Internet connection settings on Windows 10

Let’s say you find out that everything is fine with the IP address, all the checkboxes are in their places, but the Internet still doesn’t work. In this case, create a new connection according to the instructions.

On your monitor on the right you will see the “Networks” icon and right-click on it, then select the line “Network and Sharing Center”. A window will open in which you need to select “Create a new connection or network.”

A list will appear, from it select the line “Internet Connection”, then click the “Next” button. The system may notify you that the Network connection has already been completed, but you persistently click on the line “All right, create a new connection”, then select “High-speed connection”.

A window will appear in which we enter the information specified in the agreement with the provider:

• Username.
• Home address.
• Password.

After the procedure, check the “Fill in password” checkbox. Then in the “Connection name” section, enter any name for the shortcut, and then click the “Connect” button. When the connection is complete, click “Close”.

Now you know how to set up a connection to the Internet on “Ten”, and it’s not at all difficult; if something doesn’t work out for you, contact your provider and call a specialist to your home who will perform all the necessary settings. Enjoy Windows 10 and its Internet without interruptions!

Hello friends! We continue to understand setting up the Internet and solving various problems in Windows 10. I have already prepared several useful articles on this topic, I will provide links below. Well, in this article we will set up the Internet in Windows 10. Let's talk about setting up a regular network connection, high-speed connection (PPPoE), Wi-Fi networks, and 3G/4G modems. I think the article will be useful to many. After all, after upgrading to Windows 10, not everyone can immediately figure out where and what to configure and how to do it. And there are cases when, after upgrading to Windows 10, the Internet simply does not work. Most likely, you just need to reconfigure the connection.

We know that there are different ways to connect our computer to the internet. In this article I will try to talk about setting up basic connections:

• Setting up a regular Ethernet connection. Connecting the cable directly from the provider to the computer, through a router, or ADSL modem.
• Internet connection via Wi-Fi.
• Internet setup via USB 3G/4G modem.

Now we will take a detailed look at setting up an Internet connection through the connections listed above. You should find out what kind of internet you have, and you can immediately go to the desired subheading in this article. Let's probably start with Ethernet - a very popular way to connect to the Internet.

Ethernet: connecting to the Internet in Windows 10 via a network cable (router, modem)

Let's look at the simplest connection first. If your Internet provider just laid a network cable into the house, and the provider did not provide a login and password to connect to the Internet, then you have a regular Ethernet connection.

The Internet connection in Windows 10 is configured in the same way via a router or ADSL modem.

To set up such a connection, just connect a network cable from your provider (router, or ADSL modem) to your computer (laptop), into the network card connector:

If everything is fine with the Ethernet settings on the computer (nobody changed them), then the Internet should work immediately (you will understand this by the connection status in the notification panel). If the Internet via a network cable does not work, the computer simply does not respond to connecting the cable, then see. I myself faced such a problem.

If the connection appears, but status Limited, or unidentified network, and the Internet does not work, then you need to check the parameters of the Ethernet adapter.

In Windows 10 this is done like this:

Right-click on the Internet connection status in the notification panel and select . Next, click on the item in the new window Change adapter settings.

Right-click on the adapter Ethernet and choose Properties. Select an item from the list IP version 4 (TCP/IPv4). If the checkbox next to this item is not checked, be sure to check it, otherwise the Internet will not work. So, select “IP version 4 (TCP/IPv4)” and press the button Properties.

In the new window, check that automatic settings for obtaining IP and DNS addresses are set, and click Ok.

The Internet should already be working. If not, then restart your computer. If you still can’t establish a connection, then check the cable connections, whether there are any problems on the provider’s side, whether the router or ADSL modem through which you are connecting is working properly (if you do not have a direct connection to your ISP).

If you are trying to set up an Ethernet connection directly from your provider, and the Internet does not want to work for you, then ask your provider if they bind by MAC address. If it does, then you need to tell the provider the MAC address of the computer. He will register it in his settings, and the Internet will work. Few providers use such a binding, but it does happen. Read how to find out the MAC address in Windows 10.

That's it, we've sorted out this type of connection, then we have a high-speed connection.

If your Internet provider laid a cable into your house and provided you with a login, password, and possibly some other data for connecting to the Internet that you need to set in the settings of your computer or Wi-Fi router, then you need to configure High-Speed ​​on Windows 10 connection (PPPoE). What are we going to do now? Essentially, this is the same as Ethernet, but here the Internet will not work until we create connections.

If your Internet connection is through a router and a connection is configured on it (PPPoE, L2TP, PPTP), then you do not need to configure anything on your computer. Just connect the network cable from the router to the computer. I talked about setting up such a connection above.

If you connect the cable directly to the computer, and you have a username and password to connect to the Internet, then you need to create a connection.

Opening Network and Sharing Center:

Click on the item. Then, select the item Internet connection, and press the button Further.

In the next window, select the item: High speed (with PPPoE).

Next, set the username and password that your Internet provider must provide to you. You can also set a name for the connection, for example: “Beeline high-speed connection”. And you can also check the boxes next to the items saving the password, displaying the password and allowing other users to use this connection. I recommend checking the box next to Remember this password.

Click on the button To plug, and if everything is connected correctly and the parameters are set correctly, a connection will be created and a connection to the Internet will be established.

You can see and manage this connection by clicking on the Internet icon in the notification panel.

Clicking on the connection will open a menu Dialing a number, where you can connect, delete, or edit connection settings.

Internet connection via Wi-Fi

If you have a Wi-Fi router installed at home, or you want to connect your laptop to the Internet with friends, in a cafe, etc., then you can use Wi-Fi for this. If you already have the driver installed for your Wi-Fi adapter, and Windows 10 almost always installs it automatically, then all that remains is to open the list of networks available for connection, select the one you need, and specify the password (if the network is secure), and you are already connected to the Internet.

On this topic, I have already written a detailed article: . I think there should be no problems connecting to a wireless network.

Setting up the Internet via a 3G/4G modem in Windows 10

All that remains is to consider setting up a connection via a USB 3G or 4G modem. On a computer with Windows 10, setting up such a connection will be practically no different from.

First of all, we need to connect the modem to the computer and install the driver for our modem. The driver can be downloaded from the modem manufacturer’s website, from the Internet provider’s website, or simply found on the Internet. Search by modem name and model. Also, the driver can be on the disk included with the modem, or on the modem itself. If there is no driver for your modem for the Windows 10 operating system, then try to find one for Windows 8, or even Windows 7. Perhaps it will work.

After you have installed the driver, connect the modem to your computer, and you can start setting up a 3G connection on Windows 10. By the way, everything is almost the same as when setting up a high-speed connection.

Opening Network and Sharing Center.

Click on Create and configure a new connection or network and choose Internet connection.

And we set the parameters that the provider provides: number, username and password. I showed the example of the Intertelecom provider. I recommend checking the box next to Remember this password. Specify a custom connection name. Once you have filled in all the fields, click on the button Create.

If everything is ok, a connection will be created and a connection to the Internet will be established.

If the connection fails, check all the parameters and the USB modem connection. It may also be that your provider's coverage is very poor. In such cases, the Internet may not connect at all, or work very slowly. I wrote how to see what your signal level is and how to increase it. In some cases, if the network is very bad, you need.

You can start, stop, delete, or edit the created connection by clicking on the Internet connection icon and selecting the created connection.

The Internet connection status is always displayed in the notification panel. By clicking on it, you can disconnect from the Internet, or start the desired connection.

And a few more words

No matter how you set up the Internet, you may encounter a popular error "Limited". When the Internet does not work, and there is a yellow exclamation mark next to the connection status. We dealt with this problem in .

The article turned out to be long, but it didn’t seem confusing. I would like to fully answer the question posed in the title. I hope you found useful information in this article and connected your Windows 10 computer to the Internet.

You can ask questions in the comments. Before describing your problem, read this article carefully. Perhaps the solution has already been written. Also, look at the links to other articles, there is a lot of useful information on the topic.

After updating or reinstalling the OS, you may need to configure the Internet yourself. Inexperienced users may have difficulty setting up their computer to create a connection. To avoid problems, you need to follow the algorithm proposed in the article. Connecting to the Internet in Windows 10 can be done in different ways: wired and wireless. These include cable and high-speed connectivity, Wi-Fi and 3G/4G modems. For each type of connection you need to make your own settings.

Local Area Network technology is actively used in home and industrial networks. Connecting to the Internet via an Ethernet cable is the simplest and most popular method, using fiber optic wires or twisted pair cables. In this case, you do not need to enter a login and password from the provider.

Access will appear after the first connection of the cable through the communicator to the PC. To start using the World Wide Web, you need to plug the wire into the laptop into the network card connector. The network should appear, but sometimes you have to do the setup yourself.

If there are problems with access, a symbol with a yellow exclamation mark will light up in the notification panel. This means that there is a local network, but the user cannot access the Internet. Then it is recommended to check the settings. To do this, open “Network Connections”, select your adapter and open its properties. The IP and DNS addresses recommended by the service provider are written there.

Important! If access does not appear when you enable it directly from your provider, it is recommended to contact your service provider. You may have to connect your computer using a mac address, which should be reported to your provider.

Setting up the Internet via PPPoE

A high-speed PPPoE connection is used by providers to authorize users on the Internet.

Setting up the Internet via Wi-Fi network

WiFi is the most modern method of wireless communication. Nowadays, all manufactured smartphones, laptops and tablets are equipped with a Wi-Fi module. When you install a Wi-Fi router at home, the PC is connected automatically. You just need to select your Network and enter the password provided by the provider.

How to connect WiFi Internet on Windows 10:

After this you can use the Internet. You can turn off WiFi in the same way; you just need to click the “Disconnect” button.

The computer will remember the Wi-Fi connection; you won’t have to configure and establish the connection every time.

If the access point is not detected, it is recommended to reboot the router. You should also make sure that the laptop is in the area where it overlaps.

Setting up the Internet via a 3G/4G modem

Mobile versions of the Internet are convenient for users with laptops who work outside the home. Before connecting to the Internet on Windows 10 using a 3G/4G modem, you need to install the driver on your computer. You should find out the manufacturer and download the appropriate driver from their website. The modem can also be sold with a disk on which the necessary programs are installed. Setting up Beeline Internet on a Windows 10 computer and other providers is done in the same way.

How to set up the Internet on Windows 10 when connected via a modem:

Modem manufacturers also offer specialized software to make setup easier. The user needs to install the program on his computer, launch it and follow the instructions on the screen.

Once the information has been entered, you can click the “Create” button. If the data is entered correctly, access should appear. Otherwise, you should double-check the information and look at. If the network is poor and the signal is low, you may need to install an additional antenna. The speed of operation (throughput) depends directly on the quality of communication with the operator.

Once a connection has been created, you can delete it, fix it, or turn it off. This is done by clicking on the network connection icon. Select the desired item from the list. In the same way, you can edit in the computer section “Settings” - dialing a phone number.

Conclusion

There are several ways to create a new Internet connection in Windows 10: via Wi-Fi, via a cable or high-speed connection, and via a modem. Each method has its own characteristics when setting parameters.

Connecting to the Internet on a laptop or computer with the Windows 10 operating system is simple. It is necessary to correctly configure the settings for each type of connection according to the presented algorithm.

All articles on our site are audited by a technical consultant. If you have any questions, you can always ask them on his page.

Good day!

Many users, updating the OS to Windows 10 on their PCs/laptops, are often faced with a situation where they then need to configure the Internet (after updating or reinstalling the OS, the network settings are reset and the Internet connection disappears...).

Of course, a lot still depends on what type of connection and equipment is used in your case. In this article, I decided to consider the most popular options: connecting to the Internet via a Wi-Fi network, connecting with a LAN cable directly or using a router (possibly an ADSL modem is also used), and connection using 3G/4G modems.

Well, let's get straight to the topic...

Connecting to a Wi-Fi network (if you have a router installed at home)

Perhaps the most popular method, which is now used everywhere (even many providers “give” a router when you connect). Moreover, what’s interesting is that not only laptops, tablets and smartphones, but also other PCs are now connected via Wi-Fi network...

As for the connection itself: just click on the network icon in the tray (), in the menu that opens, select your Wi-Fi network and click the “Connect” button. See screenshot below.

If the data is entered correctly, you will see that the network icon has become active; when you hover over it, you will see the message “Internet access” (example below).

With Internet access (OK!)

If you see a yellow network icon status exclamation point (without access to the Internet) - then most likely your router is not configured or there is “old” data in the network connection settings. Let's fix this now...

To help! The topic of setting up a router is too extensive, so I recommend one of my previous articles on how to connect and configure a router from scratch. -

Regarding network connections: to configure them, you should open the control panel window, in which they will all be presented. To do this you need:

1. press the key combination Win+R;
2. In the "Run" window that appears, enter the command ncpa.cpl;
3. click OK. See screenshot below.

Opening network connections (universal method)

Then go to the properties of “IP version 4...” (example below), and set the receiving IP address and DNS servers automatically.

Save the settings and check the network operation.

[Instructions to help!]

The laptop does not connect to the Wi-Fi network - there is a red cross on the network icon:

Wi-Fi without Internet access (yellow exclamation mark on the network icon is lit) -

Connecting to the Internet via a LAN cable, Ethernet (directly with an Internet provider cable, via a router, ADSL modem)

Ethernet is the most popular data transmission technology. In Russia, most Internet providers use it, laying regular network LAN cables in users’ apartments. At the same time, the Internet cable can be connected either directly to a computer/laptop or through a router or ADSL modem. In principle (formalities aside), this is the same Internet connection: it’s just that in some cases an additional one is used. equipment.

To set up an Ethernet connection- in most cases, it is enough to connect a LAN cable to the network card of your computer/laptop. The Internet, in principle, should already start working.

Note!

1) In some cases, in the network adapter settings you need to specify specific IP addresses and DNS servers (usually this is stated in the agreement you enter into with your Internet provider). Therefore, if you have incorrect IPs “indicated” there, DNS - the Internet will not work (just below we show how to set this up).

2) In addition, for some providers, after connecting the LAN cable, only the local network will work. For the Internet, you need to create a PPPoE connection (more on that in the next paragraph of the article).

By the way, if everything is not in order with your Internet connection and a problem is detected, you will even notice it by the network icon in the tray: a yellow wax light will be lit on it. icon (there is a local network, but without access to the Internet)

In this case, I recommend checking the network adapter settings. You can do this by opening a tab in the Windows Control Panel. To do this, press the Win+R button combination, enter ncpa.cpl in the “open” line, and click OK.

How to open network connections || ncpa.cpl

Then, in the network connections tab that opens, select your adapter [* through which you are connected] and open its properties (usually "Ethernet" or "Local Area Connection").

Next, open the properties of the "IP version 4..." line, and specify the IP addresses, DNS servers, mask, etc. according to the recommended settings of your provider. In the vast majority of cases, it is enough to set the sliders to automatically obtain IP and DNS.

Setting up an Internet connection (PPPoE)

The high-speed PPPoE Internet connection option is one of the most popular in Russia today (which is why I decided to consider it). To connect to the network, the Internet provider (upon concluding an agreement) gives you a login and password. In general, this is all that is required to set up the connection. Comfortable?!

Note!

Actually, you have to set up a PPPoE connection in Windows in cases where the cable from the Internet provider is connected directly to the network card of your PC/laptop (for example).

To do this, go to: Control Panel\Network and Internet\Network and Sharing Center . Then you need to click on the link “Create and configure a new connection or network.” See screenshot below.

How to access the Windows 10 control panel [instructions]-

Then select the option "Connect to the Internet. Set up a broadband or dial-up Internet connection." (see example below).

Then enter your login (username) and password. By the way, I recommend giving permission to other users to use this Internet connection.

If the login and password have been entered correctly, the cable is connected to the PC (and the provider is not carrying out maintenance work) - after a few seconds the computer should connect to the network.

In general, the whole setup goes quite quickly...

Internet setup via 3G/4G modem

1) First, connect the 3G (4G) modem to your laptop/PC and install the drivers. It is best to download the driver from the official website of the manufacturer of your device (perhaps they were included with your modem (and upon purchase you were given a disc)).

You can also install drivers into the system using special software. utilities for automatically searching and updating them-

2) Next, go to the Windows Control Panel (), open the section "Network and Internet", then "Network and Sharing Center" and follow the link "Creating and setting up a new connection or network". See screenshot below.

3) Then indicate that you want to create an “Internet Connection”, the type of connection is “Dial-up” (see example below).

4) Then indicate the number to dial, username and password (these data should be provided to you by the Internet provider whose services you decide to use).

5) Actually, that's it! The connection is ready and you can use it. To launch it, go to Windows settings (via START or using the key combination Win+i) , open the "Network and Internet/Dialing" section: and you will see the created connection. Just click on it with the mouse and press the connect button.

6) You can also find the created connection by pressing the combination Win+R, entering the command ncpa.cpl and clicking OK. The “Network Connections” window should open, where you will see what we created. To avoid searching for it every time, you can place the shortcut on your desktop.

You might find this article useful about how you can distribute Wi-Fi from a laptop (i.e. create an access point for other devices (smartphone or tablet, for example)) -

That's all, I hope your setup will be easy and quick!

All the best.

A question like setting up an Internet connection on Windows 10, worries many users who like to keep up with the times. This is not surprising, because the vast majority of modern people find it difficult to imagine their life without a computer, and therefore without the Internet. As technology advances, not only the computers themselves improve, but also the operating systems. More recently, everyone rejoiced at the appearance of the seventh and eighth versions of the famous Windows, but before they could even blink an eye, Windows 10 appeared in all its glory to the public.

It goes without saying that each subsequent version of Windows is more functional and more advanced than the previous one, so many users immediately wanted to install Windows 10 on their computers. And then a problem arises: the Internet has disappeared. And you have a logical question: how configure network access on Windows 10? Let's talk about this in this article.

Reasons for lack of Internet connection

To begin with, let us denote in general causes lack of internet connection, because it is quite possible that the “ten” has nothing to do with it, and you should make sure of this. So, there are several reasons for the “loss” of the Internet, namely:

• Damage to the network line - most often the Internet is disconnected for this reason. This may be a break or damage to the wire, failure of one or another equipment, or something like that. First, call your provider and make sure everything is ok.
• If Internet communication is provided via a 3G modem or SIM card, then access to the Network may not be possible due to poor network coverage of a particular mobile operator.
• If the Internet connection is made via Wi-Fi, the reason for the “loss” of access may be the excessive distance of the Wi-Fi router from the computer device.
• Damaged home network cable or connector - Check your home wire and connector to ensure they are in good working order.
• Router malfunction - to make sure that the router is not at fault, disconnect it from the network, and after a few seconds turn it on again.
• The network card or Wi-Fi adapter is malfunctioning - restart the computer device and remove the adapter from the connector. After a few seconds, insert it back.
• No matter how trite it sounds, but perhaps you forgot to pay the tariff? If so, then you know what to do.

So, you have done everything possible and, using the method of elimination, made sure that none of the above reasons are “yours”. In this case, one thing remains: there were Internet connection settings are lost due to reinstallation of the operating system. Well, in that case, you just need to check and re-set them.

Checking adapter properties

If the problem due to which there is no access to the Network is software and, accordingly, can be solved directly from your computer device, then it can be easily fixed. First of all you need check adapter properties, and it's easy to do.

First, click on the Internet icon, and then select “Network Settings.” Here you will need the “Ethernet” item, and in it select the “Configure adapter settings” line.

A window will open in front of you where you select the desired network, then right-click on the “Properties” button, then again on the “Properties” button. Another window will open where you need to check whether the “birds” are checked next to IP version 4 and IP version 6. If the checkboxes are “off”, check them again. The Internet may not be working due to an IP address not being received.

Internet connection settings

Suppose you find out that everything is in order with the IP address, the checkboxes are safely in their places, but the Internet still does not work. In this case you need to create new connection in Windows 10, following the instructions.

On the monitor on the right, find the Network icon and right-click on it, and then select the line “Network and Sharing Center”. A window will open in which you should select “Create a new connection or network.”

You will see a list from which you select the “Internet Connection” line, then click the “Next” button. The system may tell you that the connection to the Network has already been completed, but you insist and click on the line “Create a new connection anyway”, then select “High-speed connection”.

A new window will appear in which you will need to enter the information specified in the agreement with the provider, namely:

• username (entered in Latin lowercase letters);
• home address (words are separated by an underdash);
• password (the one indicated in the agreement).

After that, check the “Remember password” checkbox. In the “Connection name” section, enter any name for the shortcut (for example, “Internet” or “network”), and then click the “Connect” button. When the desired connection is completed, click on the “Close” button.

Now you know, how to set up internet on windows 10, and it's not as difficult as it seems. But if something doesn’t work out for you, just contact your provider and call a specialist who will make all the settings and answer all your questions. Enjoy the Internet and the power of Windows 10!